Executive summary: The Winter School on Sustainable Mineral Exploration was jointly organized by two European projects—PACIFIC and INFACT. The event was held at the International Campus of Andalusia in Huelva, Spain, between the 9th and 12th March 2020. The Winter School was divided in 3 lecture sessions, 1 practical session, and 2 visits to mining sites. The main goal of this school was to present the techniques and knowledge on sustainable mineral exploration that have been developed within the INFACT and PACIFIC projects. The school targeted an audience of European master students, PhDs and post-doctoral researchers. A total of 40 students, including 15 from the University of Huelva, physically attended the school. An additional 13 students participated in parts of the school via video conference, since unfortunately due to travel restrictions stemming from the COVID-19 pandemic those 13 students were unable to attend in person. Videoconferencing was a last-minute adaptation made by the Winter School to allow for the participation of individuals under travel bans, quarantine, or other restrictions. Students (both physical and remote attendees) came from 13 countries. The results of the anonymous survey conducted at the end of the school reveal that the event was a success, despite the ongoing COVID-19 crisis.

Retrieving reflection arrivals from passive seismic data using Radon correlation

Since explosive and impulsive seismic sources such as dynamite, air guns, gas guns or even vibroseis can have a big impact on the environment, some companies have decided to record ambient seismic noise and use it to estimate the physical properties of the subsurface. Big challenges arise when the aim is extracting body waves from recorded passive signals, especially in the presence of strong surface waves. In passive seismic signals, such body waves are usually weak in comparison to surface waves that are much more prominent. To understand the characteristics of passive signals and the effect of natural source locations, three simple synthetic models were created. To extract body waves from simulated passive signals we propose and test a Radon-correlation method. This is a time-spatial correlation of amplitudes with a train of time-shifted Dirac delta functions through different hyperbolic paths. It is tested on a two-layer horizontal model, a three-layer model that includes a dipping layer (with and without lateral heterogeneity) and also on synthetic Marmousi model data sets. Synthetic tests show that the introduced method is able to reconstruct reflection events at the correct time-offset positions that are hidden in results obtained by the general cross-correlation method. Also, a depth migrated section shows a good match between imaged horizons and the true model. It is possible to generate off-end virtual gathers by applying the method to a linear array of receivers and to construct a velocity model by semblance velocity analysis of individually extracted gathers.

Monitoring of fields using body and surface waves reconstructed from passive seismic ambient noise

There are important economic, environmental and societal reasons for monitoring production from oil, gas and geothermal fields. Unfortunately, standard microseismic monitoring is often not useful due to low levels of microseismicity. We propose to use body and surface waves reconstructed from ambient seismic noise for such monitoring. In this work, we use seismic data recorded from a dense sensor array at the Groningen gas field in northern Holland and show how direct P-waves can be extracted from the ambient noise cross correlations and then used to monitor seismic velocity variations over time. This approach has advantages over the use of coda wave interferometry due to the ability to localise such changes in the subsurface. We show how both direct and refracted (head) P-waves as well as Rayleigh surface waves can be used for such field monitoring, with changes of ∼1% being resolved. Both fundamental and first overtone Rayleigh waves are used to localise such changes, which correspond nicely to known geology to within 100 m.

Executive summary: This document describes the structure and contents of the public website set up for PACIFIC on 29th November 2018 with the URL http://www.pacific-h2020.eu and updated in August 2020 to give more visibility to the expected impact of the project on mineral exploration in Europe, and reflect changes in the consortium. The website is based on Responsive web design (RWD), which provides an optimal viewing and interaction experience — easy reading and navigation with a minimum of resizing, panning, and scrolling — across a wide range of devices (from desktop computer monitors to mobile phones).

On the PACIFIC public website, you can find information about the project objectives and results, the concept, work plan and expected impact, together with the list of participants, external advisors and projects identified for clustering opportunities. The website also acknowledges the financial support received under the European Union’s Horizon 2020 research and innovation programme with the EU emblem as well as a specific statement. This is visible at the bottom of every webpage.

Throughout the project the PACIFIC public website will become a major tool to present the project research outcomes to a wide audience with: links to scientific peer-reviewed publications, project documentation, public deliverables and press releases available for download. On-going activities will also be regularly updated and communicated through news and events.

Download the PACIFIC flyer https://www.pacific-h2020.eu/wp-content/uploads/pacific-flyer.pdf 

Noise-based ballistic wave passive seismic monitoring. Part 1: body waves

Unveiling the mechanisms of earthquake and volcanic eruption preparation requires improving our ability to monitor the rock mass response to transient stress perturbations at depth. The standard passive monitoring seismic interferometry technique based on coda waves is robust but recovering accurate and properly localized P- and S-wave velocity temporal anomalies at depth is intrinsically limited by the complexity of scattered, diffracted waves. In order to mitigate this limitation, we propose a complementary, novel, passive seismic monitoring approach based on detecting weak temporal changes of velocities of ballistic waves recovered from seismic noise correlations. This new technique requires dense arrays of seismic sensors in order to circumvent the bias linked to the intrinsic high sensitivity of ballistic waves recovered from noise correlations to changes in the noise source properties. In this work we use a dense network of 417 seismometers in the Groningen area of the Netherlands, one of Europe's largest gas fields. Over the course of 1 month our results show a 1.5 per cent apparent velocity increase of the P wave refracted at the basement of the 700-m-thick sedimentary cover. We interpret this unexpected high value of velocity increase for the refracted wave as being induced by a loading effect associated with rainfall activity and possibly canal drainage at surface. We also observe a 0.25 per cent velocity decrease for the direct P-wave travelling in the near-surface sediments and conclude that it might be partially biased by changes in time in the noise source properties even though it appears to be consistent with complementary results based on ballistic surface waves presented in a companion paper and interpreted as a pore pressure diffusion effect following a strong rainfall episode. The perspective of applying this new technique to detect continuous localized variations of seismic velocity perturbations at a few kilometres depth paves the way for improved in situ earthquake, volcano and producing reservoir monitoring.

Executive Summary: The passive seismic survey of the La Cruces mine site was initiated during discussion between partners of the PACIFIC and INFACT H2020 projects in December 2018. The initial design for the deployment covered a large area, about 7 x 4 km extending to the north and south of the mine but this was reduced to a smaller tighter 2 x 1 km array in February 2019. A collapse of the northside of the open pit then eliminated the possibility of placing nodes to the west of the pit and this resulted in an even smaller array. Data treatment proved to be very difficult for several reasons. The array was smaller than originally planned, but more importantly a significant proportion of the nodes, about 30%, were placed in the pit. The large differences in elevation between adjacent nodes and the differences in orientation of pit walls and terraces introduced unanticipated difficulties in processing the seismic data. 

We used 33 days of passive seismic records to retrieve the fundamental mode of Rayleigh waves propagating in the subsurface. We mostly used man-made ambient noise generated in the vicinity of the mine in the period band [0.3 - 1.5] s. Strong anthropogenic noise in the middle of the array forced us to use one-bit normalization and very intense pre-processing to retrieve usable cross-correlation signals. We were able to pick individual group and phase velocity dispersion curves from correlations computed between the majority of sensor pairs for stations separated by less than 2 km. We retained about 15% of all possible dispersion curves after a thorough quality check based on expert visual inspection. The aperture of the array and the frequency content of the noise allowed us to invert a velocity model down to 500 m depth. Long offsets are mainly discarded inducing a poor coverage of the central part of the pit. A high velocity anomaly beneath the northern part of the site where topography is not a problem and where the array is denser can be resolved and could correspond to the massive sulphide ore body at depth. The depth of cover in the north-eastern part of the study area is well represented by the iso-velocity surface of 750 m/s.